Allen Bradley PLC

Service Details:

The 1768-L4x controller combines both a 1768 backplane and a 1769 backplane. The 1768 backplane supports the 1768 controller, the 1768 power supply, and a maximum of four 1768 modules. The 1769 backplane supports 1769 modules Configure an individual RPI for each local 1769 Compact I/O module. Use the default RPI numbers that the programming software automatically assigns or select faster RPI values as fast as 1 ms I/O module update times do not affect overall 1768 bus performance:

Features:

• Use faster RPI values for time critical I/O without impacting overall 1769 Compact I/O performance.
• Use Immediate Output (IOT) instructions for further reduction in I/O module update times.

Service Details:

The ControlLogix® controller provides a scalable controller solution that is capable of addressing a large amount of I/O points. The ControlLogix controller can be placed into any slot of a ControlLogix I/O chassis and multiple controllers can be installed in the same chassis. ControlLogix controllers can monitor and control I/O across the ControlLogix backplane, as well as over network links. To provide communication for a ControlLogix controller, install the appropriate communication interface module into the chassis.

Service Details:

The SmartGuard 600 safety controller is a programmable safety controller designed for safety applications that require some complex logic allowing for more advanced safety functionality. It features 16 safety-rated inputs, 8 safety-rated outputs, 4 pulse test sources and an optional EtherNet/IP™ port. To support both standard CIP and CIP safety, a DeviceNet™ connection is also included. Confi guration and programming is accomplished on EtherNet/IP, DeviceNet, or through the built-in USB port. Since the SmartGuard 600 safety controller is a safety master on DeviceNet, you can use Rockwell Automation® Guard I/O™ modules to expand the number of safety devices the SmartGuard 600 can control. It can also perform safety interlocking between a GuardLogix® or other SmartGuard safety controllers. With your choice of EtherNet/IP or DeviceNet, other devices such as standard PLCs and HMIs can read data out of the SmartGuard 600 safety controller for system level interlocking, diagnostics and troubleshooting. Programming is done using RSNetWorx™ for DeviceNet™. Once inside RSNetWorx, you can launch an editor that will allow you to write function block programs for the SmartGuard 600 safety controller. No additional programming software is needed! With ten safety application instructions plus another dozen logic and timing instructions, you can write powerful, yet simple safety control programs.

Service Details:

When it comes to flexibility and power, the Allen-Bradley® SLCTM 500 family from Rockwell Automation® is a proven solution of small logic controllers. Designed with smaller to mid-sized automation applications in mind, the SLC 500 provides powerful, reliable performance without requiring customers to pay for the unused capacity and features of a full-size programmable logic controller. The SLC 500 was one of the first full-featured, small controllers on the market, and it remains the gold standard in small logic controllers more than a decade after its introduction. It’s a rugged chassisbased platform, which means you can configure exactly the stand-alone or distributed system you need for dependable control of your application. In fact, the SLC 500 provides cost-efficient, reliable control in hundreds of thousands of applications around the world — everything from amusement park rides and microbreweries to pharmaceutical and food processes.

What’s more, we’re constantly looking toward the future of automation, evolving and enhancing the SLC 500 system to stay ahead of our customers’ ever-changing demands. And we offer unmatched support, having trained more than 100,000 satisfied customers in the United States alone. No wonder we have a worldwide installed base of 1.6 million — and growing

Service Details:

Our Bulletin 1752 SmartGuard™ 600 Controllers with Safety feature 16 safety-rated inputs, 8 safety-rated outputs, 4 pulse test sources and an optional EtherNet/IP™ port. Each controller also includes a DeviceNet™ connection to support both standard CIP and CIP safety. You can configure and program on EtherNet/IP, on DeviceNet or through the built-in USB port. These small, cost-effective intelligent controllers can perform safety interlocking between GuardLogix® or other SmartGuard safety controllers.

Features:

• Ideal for mid-level safety applications that are too complex for safety relays, yet too simple for full-sized safety PLCs
• Integrates with Guard I/O™ modules to expand the number of safety devices you can control
• Provides data to standard PLCs and HMIs through EtherNet/IP™ or DeviceNet™
• Lets you configure and program through RSNetWorx™ for DeviceNet software (required for EtherNet/IP controller)

Additional Information:

• Protect your people, productivity, and environment with our Safety Components and integrated Safety Solutions. We understand your factory floor challenges and can help you meet your goals with one of the broadest safety portfolios in the industry.

Service Details:

Like most good things, even the PLC-5 has come to an end. But don’t worry… While the PLC-5 Control System is discontinued and no longer available for sale, we have the tools and assistance to help you migrate to our ControlLogix Control Systems.

PLC-5 to ControlLogix Migration:

• Discover our ControlLogix Control Systems portfolio.
• Get help with our migration tools and assistance.

Migration Solutions:

• Let Rockwell Automation help you determine your options and make it easier for you to plan and manage the transition to more modern technologies.
• Use the Product Lifecycle Status search tool to find specific lifecycle information by catalog number.
• Learn more about our Migration Solutions.

Configuration & Selection Tools:

• CrossWorks — Convert competitive catalog numbers to similar Allen-Bradley products.
• ProposalWorks — Convert Build complete quotes and proposals.

Other Resources:

• Knowledgebase — Visit our online resource for technical information, support chat and forums, software updates, and product safety advisories/notices.

Service Details:

Our Bulletin 1769 CompactLogix™ 5370 Controllers are part of the Integrated Architecture® system. These controllers include integrated safety, and use the same programming software, network protocol, and information capabilities as all Logix controllers. This provides a common development environment for all control disciplines. Consistent tools and features help users to lower engineering investment costs, ease diagnostics and troubleshooting, and speed up time to market for small to mid-size applications.

Features:

• Ideal for small, to mid-size applications that require low axis motion and I/O point counts
• Offers support for Integrated Motion over EtherNet/IP™ for maximized scalability
• Provides support for Device Level Ring (DLR) network topologies to help increase network resiliency
• Removes the need for lithium batteries with built-in energy storage
• Includes up to a 2-GB secure digital (SD) card for fast program save and restore
• Offers a smaller form factor for maximized cabinet space
• Supports up to 2 axes Kinematics for simple articulated robotics
• Offers open socket capability that allows support for Modbus TCP as well as devices such as printers, barcode readers and servers
• Provides ability to connect with scaled HMI options from the PanelView™ Plus portfolio to PanelView 800 graphic terminals for simple features
• Available with conformal coating

Compact GuardLogix® Safety Controllers:

• Provides integrated safety and integrated motion in a single controller
• Supports integrated safety up to SIL 3, PLe CAT 4

 

On-Machine Controllers:

• Delivers standard, safety and motion control for On-Machine™ applications
• Provides up to 16 axes of Integrated Motion over EtherNet/IP
• Minimizes hardware in the control cabinet with placement directly on the machine
• Helps protect against dust and water with IP67-rated wash down protection
• Offers integrated safety control up to SIL 3, PLe, CAT 4 in an On-Machine version

Software:

• Use RSLogix 5000 programming software or the Studio 5000 Logix Designer software from Rockwell Software® to design and configure your CompactLogix system with 5370 controllers.
• The controllers and modules you select, along with your network configuration, determine what additional software packages you need to configure and program your system. Additional required software may include RSNetWorx configuration software and RSLinx communication software.

 

Applications:

Typical applications for CompactLogix 5370 L2 and L3 Controllers include:

• Indexing tables
• Automatic assembly machines
• Packaging — Intermittent VFFS, HFFS
• CPW — Winders, Rewinders, Slitters
• Hoisting & cranes
• Process Skids

Typical applications for CompactLogix 5370 L1 Controllers include:

• Transfer systems
• Feeders
• Case packers & erectors
• Rotary knife
• Smart belts
• Packaging — Intermittent VFFS, HFFS
• Labeling and wrappers
• Auxiliary controls

Service Details:

Our Bulletin 5800 SoftLogix™ Control Systems are based on the Logix platform and seamlessly integrate machine control, motion control, and information processing. They take the control functions normally found in dedicated programmable controllers, encapsulate those functions in software and run them on a commercial operating system. The multi-tasking operating system allows you to prioritize 32 configurable tasks.

Features:

• Runs on Windows® 7 and Windows Server 2008 operating systems
• Uses the same Studio 5000® environment and Logix control engine as other Logix platforms
• Includes platform independence (whitebox, industrial computer, etc.).
• Provides connection to open networks, including EtherNet/IP™, ControlNet™, and DeviceNet™
• Offers customization of data access, virtual backplane toolkit for integration of third party networks or specialty modules
• Supports multiple I/O interfaces
• Provides ability to develop custom C programs to integrate via external routines

1789-L10 SoftLogix™ Controllers

• One controller
• Memory size limit of 2 MB per controller
• Two PCI network interface cards
• One EtherNet/IP card
• One 1784-SIM module
• No third-party virtual backplane module support
• Three-slot virtual chassis

1789-L30 SoftLogix Controllers

• Two controllers
• Memory size limit of 64 MB per controller
• Five PCI network interface cards
• One 1784-SIM module
• Third-party virtual backplane module support
• Five-slot virtual chassis

 

1789-L60 SoftLogix Controllers

• Six controllers
• Memory size limit of 64 MB per controller
• 16 PCI network interface cards
• 16 1784-SIM modules
• Third-party virtual backplane module support
• 16-slot virtual chassis

Other requirements include:

• Floppy drive to support the Activation disk
• Hard disk drive must support bus mastering
• You might also need bus-mastering drivers for the PC chip set; for Intel motherboards, this software is called "Application Accelerator"
• Demanding applications including sequential, motion, and other local applications running on the PC may require a dual CPU to achieve performance requirements

Service Details:

Our Bulletin 1763 MicroLogix™ 1100 Programmable Logic Controller Systems add embedded EtherNet/IP™, on-line editing, and an LCD panel to the MicroLogix family. The built-in LCD panel shows controller status, I/O status, and simple operator messages. With 2 analog inputs, 10 digital inputs and 6 digital outputs, the MicroLogix 1100 controller can handle a wide variety of tasks.

Features:

• Includes built-in 10/100 MBps EtherNet/IP™ port for peer-to-peer messaging
• Provides 8 KB memory (4 KB user program with 4 KB user data)
• Lets you access, monitor and program from any Ethernet connection
• Supports on-line editing
• Provides embedded web server so you can configure controller data to be displayed as a web page
• Contains isolated RS-232/RS-485 combination port for serial and networked communication
• Lets you monitor and modify controller data through an embedded LCD screen
• Compatible with 1762 MicroLogix Expansion I/O modules (up to four modules per controller)
• Supports up to 144 digital I/O points

Software:

• Use RSLogix 500 programming software from Rockwell Software® to configure your MicroLogix™ programmable controllers.

MicroLogix Systems Building Blocks

The following pre-configured building blocks implement common control tasks as part of your machine design. These building blocks use the RSLogix™ software and are available by ordering the DVD.

• Application-focused building blocks
• Pre-written control programs
• Quick start guides
• Sample wiring diagrams
• Sample bill of materials
• Sample panel layouts
• Sample HMI screens with diagnostics

Applications:

Typical applications for our MicroLogix™ programmable controllers include:

• Material Handling
• Packaging Applications
• General Industrial Machinery
• Printing
• Food and Beverage
• Pharmaceutical
• Water Wastewater / SCADA
• Clutch/Brake control
• Position Control - Pick-and-place / Conveyor

Configuration & Selection Tools:

• CrossWorks — Convert competitive catalog numbers to similar Allen-Bradley® products.
• Integrated Architecture Builder — Select hardware and generate bills of materials for projects.
• ProposalWorks — Build complete quotes and proposals.

Other Resources:

• Firmware and Other Downloads — Obtain a variety of downloads to accompany your MicroLogix™ controllers.
• Procurement Specifications — Visit our online resource to find the procurement specifications for this product.
• Knowledgebase — Visit our online resource for technical information, support chat and forums, software updates, and product safety advisories/notices.

Service Details:

Our Bulletin 1760 Pico™ Programmable Logic Controllers and PicoGFX™ Controllers are discontinued and no longer available for sale. We recommend these replacement products. The information below summarizes the changes to this manual since the last printing as publication 1760-UM001C-EN-P, April 2005. To help you locate new and updated information in this release of the  manual, we have included change bars as shown to the right of this paragraph.

Configuration & Selection Tools:

• CrossWorks — Convert competitive catalog numbers to similar Allen-Bradley® products.
• ProposalWorks — Build complete quotes and proposals.

Other Resources:

• Knowledgebase — Visit our online resource for technical information, support chat and forums, software updates, and product safety advisories/notices.